TECHNICAL AND ECOLOGICAL ADVANTAGES
SYSTEM ADAPTABLE TO ALL DIMENSIONS OF POOLS:
From a small 3 x 5 family pool to a 14 x 7 pool, the system is infinitely modular!
Just follow the rule: 1 filter module per 25 m3
SWIMMING POOL WITHOUT TECHNICAL ROOM:
The filter module(s) being very compact, they are installed directly in the backfill of the swimming pool during its construction and are completely invisible (except surface access hatch)
It is therefore not necessary to have a technical room.
RESPECTED WATER CIRCULATION
Unlike existing filtration blocks grouping a skimmer and a discharge in the same area, our system respects the classic circulation which promotes better mixing of the water in the pool: Suction from the bottom and from the surface with 1 (or more) skimmer(s) and discharges on the opposite side.
ABSOLUTE SILENCE IN OPERATION:
No more humming, often very annoying, of traditional pumps, our system makes absolutely no noise because the pump is immersed in 30cm of water and located in a buried tank, closed with a waterproof lid.
ELECTRIC CONSUMPTION 5 to 6 TIMES LESS than traditional filtration:
The pump that equips our modules consumes only 50 W/h for a real flow rate of 7 m3/h.
This technological miracle is possible thanks to the design of its latest generation digital motor, but also to the position of the pump (located at the same height as the discharges) and above all to the principle of "communicating vessels" which means that the water arrives by gravity through the filters and into the pump without the latter needing to suck up the water column and thus preserve energy.
As an option, the filtration can be powered by a 150 wc solar panel which will cover the entire consumption of 2 modules. During periods of low use of your filtration, our "intelligent" solar system will automatically send the unconsumed surplus into your home and can be used by your various electrical appliances.
MORE EFFECTIVE FILTRATION THAN A SAND FILTER
Each filter module is equipped with 2 filters. A first, having a filtration fineness of approximately 50 microns intended to collect the largest impurities (twigs, insects, etc.) and a second filter of very large capacity made up of a reinforced synthetic media, of fineness 15 microns and a total surface area of 16.3 m².
The pump flow / filter surface ratio offers a very slow passage through the filter media
(0.37 m3 / h /m²), guarantee of incomparable water quality.
(for information, a sand filter has a fineness of 40 microns and a rapid passage of approximately 40 m3/h/m²)
This very slow passage of water also makes it possible to preserve the filter and therefore SPACE ITS PERIODIC MAINTENANCE .
WATER SAVING:
As we have just seen, cleaning our filter media is done less often than a sand (or diatomaceous earth) filter, the operation simply consists of brushing it under a tap. There is therefore practically no water consumption for its maintenance.
For information: A sand filter consumes on average 750 liters of water each time it is washed!
Knowing that you have to do this washing every 15 days, do the math!
COST OF INSTALLATION IDENTICAL TO TRADITIONAL FILTRATION
Installing filter modules requires much less work than traditional filtration.
The gain in pipes, fittings, valves and especially MO compensates the value of 2 filter modules.
(without taking into account any possible cost of creating a technical room)
