How does it work?

The principle is very simple:

The water circulates from the bottom drain and the skimmers to the filter module tank (located in the pool embankment), solely by the principle of " communicating vessels".

It passes through a first filter whose role is to retain "large" impurities (insects, twigs, etc.), then it is filtered much more finely thanks  to a second very large capacity filter (40 m3/h) which can retain impurities up to 15 microns!. All this movement of the water through the 2 filters is done solely by gravity , without depression or pressure of the pump, in short: WITHOUT ENERGY

A micro submerged pump  with a latest generation digital motor, with very low electrical consumption (50 W /h), will return the water, freed of all its impurities, to the swimming pool through conventional discharges. 

​

Each filter module has a flow capacity of 7 m3/h for the pump, and 40 m3/h for the filter. Depending on the volume of the pool to be equipped, 1 or more modules are installed...

(1 module per 25 m3 of water)

​

As an option, the system can be equipped with automatic water treatment by electrolysis and automatic PH régulation

​

The electrical consumption of the pump is 6 times less than a conventional pump for the same output and allows significant savings.
But with the "solar option" for our ecological filter modules, the annual cost of electrical consumption of your pool will be:  ZERO EURO!

It is thanks to the very low electrical consumption of the submerged pump  that the sun will be sufficient to provide the electrical energy it needs!

The power of this solar kit will compensate for the consumption of the pump, the additional energy which will not be consumed by your swimming pool will automatically be  INJECTED INTO YOUR NETWORK and can be used by the other domestic devices in your house and thus reduce your energy bill. 'electricity.